Chinese
English
Phone: 020-87540643
Fax: 020-87540663
Technical support: 13824476182
Functions and applications: TKS - B is used for electronic measurement and control line of the protector, prevent the data line due to lightning or travelling wave caused by the surge overvoltage for related equipment damage. TKS - B is applied to all voltage not over 110 v, frequency does not exceed 2 MHZ data on the protector, the installation in LPZ 0 to 2. FRD and FLD series of protector is applied to not grounded (asymmetric, suspension) dual system. FRD can be installed in the allow resistance enlarged circuit, if the circuit is not allow resistance increases, the use of FLD. TKS - B protector only level protection circuit, but its pass flow especially big. Installation: OBO TKS - type B protector can be installed in any standard switch box or distribution box, simply installed in 35 mm guide rail. No screw terminal reduces the cost of installation.
Performance schedule TKS - B protector use advantages
Installed on the 35 mm guide can be installed directly in the power distribution cabinet or switch box
But there is no problem to provide all kinds of voltage user oriented surge protection become possible
No screw pressure welding type terminal is easy to install
Y type circuit, safe for the line, neutral or protection ground to the surge can effectively restrain
TKS - B technical parameters
Lightning arrester TKS - B
LPZ 0 to 2
Nominal voltage UN maximum sustainable working voltage UC 110 v130v
Rated load current FRD, FRD2 IL 16 a
Rated load current, FLD2 FLD
Nominal discharge current (8/20) In 20 ka
Impact circulation capacity (10/350) Iimp 6 ka
Voltage protection level Up3-4 acuities 450 v
Each line series resistance FRD, FRD2 R
Each line series inductance FLD, FLD2 L
Connecting cross sectional area connecting line peeling length color material installation size 0.14-2.5 mm26-7 mm light gray, like RAL 7035 polyamide 6 according to DIN EN 50022 installed on the 35 mm guide long 90 mm, 17.8 mm wide, deep 62 mm
 |
|
|
 |
